The datalogic scanner must be connected to a simple USB plug on the POS.
Setup the QuickScan™ 2500 or Honeywell 1900
1. QuickScan™ 2500
Scan the 4 following codes, in the right order
Then, verify that the set-up is correct.
In order to ensure that the setup is correct, please go to Notes/Word/Any text editor app & scan the following barcode with the scanner
CORRECT: If the scanner writes smeetzpos12345 on the text editor
INCORRECT: if you obtain something else with prefix/suffix/additional characters/wrong characters
If you have errors based on keyboard (AZERTY vs QWERTY), try to restart the config with another language at step 3 (France, UK, US etc)
If prefix/suffix, you can restart from Scan 1 a second time
Other configuration possibilities (sounds, bips etc) possible by using that file: QuickScan 2500 Family Product Reference Guide eng.pdf
2. Honeywell 1900
The Smeetz POS also supports the Honeywell 1900 scanner. Here's how to configure it:
Connect the Scanner
Plug the Honeywell 1900 scanner into the POS via a USB port.
Configure the Scanner
Follow the configuration steps using the specific codes provided in the Honeywell 1900 user guide. Refer to the guide from page 61 onwards for detailed instructions
Test the configuration
Open a text editor (Notes, Word) on the POS.
Scan the barcode below to test the configuration:
CORRECT: If the scanner writes "smeetzpos12345" in the text editor.
INCORRECT: If you get extra characters, check the keyboard configuration (AZERTY vs QWERTY) and redo the steps.